All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
Keywords [ 1 2 ball nose cutter ] match 35 products.
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
16mm 2 Flutes Carbide Ball Nose Endmill Blue Coating For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R4 |
Diameter Custom End Mills Four 4 Flute Roughing End Mill Ball Nose Solid Milling Cutter
| Name: | Custom End Mill 4F Roughing Ballnos End Mill |
|---|---|
| Type: | Custom End Mill |
| Coating: | Blue Nano/customized |
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.25 |
| Flute Length: | 5mm |
1/2 Inch 12mm Ball Nose End Mill 30 Degree End Mill Cutter Drill Bit AlTiSiN Coating HRC55
| Product Name: | HRC55 2 Flutes 12mm Ball Nose End Mill |
|---|---|
| Diameter: | 12R6 |
| Flute Length: | 24mm |
8mm 4F 9/16" 7/16" 5/16" Ball Nose End Mill Steel Cnc Ball Nose Bit
| Product Name: | HRC50 4 Flutes Ball Nose End Mill 8mm |
|---|---|
| Diameter: | 8mm |
| Flute Length: | 16mm |
Solid Carbide 2 Flute Ball Nose End Mill 1mm HRC 50 For Steel Cnc Cutting Tools
| Coating: | AlTiN |
|---|---|
| Type: | Ball Nose End Mill |
| Material: | Carbide |
Hard Steel Carbide Ball Nose End Mill 2 Flutes 6mm Shank Diameter
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R3 |
30 Helix Altin Coated End Mill Ball Nose 10mm Carbide End Mill
| Product Name: | HRC55 2 Flutes 10mm Ball Nose End Mill |
|---|---|
| Diameter: | 10R5 |
| Flute Length: | 20mm |
4mm 1/8 Inch Diamond Ball End Mill For Steel 4 Flutes RLD Tools
| Product Name: | HRC50 4 Flutes Ball Nose End Mill 4mm |
|---|---|
| Diameter: | 4mm |
| Flute Length: | 8mm |