All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
Keywords [ high speed end mill ] match 47 products.
0.118" 3/32 Inch 3mm Hardened Steel End Mills With Corner Radius Cutter 1/4 Shank
Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
---|---|
Flute Number: | 4 |
Material: | GU092 GESAC |
High Efficiency 3 Flutes Aluminium End Mill DLC Coating Big Capacity 12mm
Product Name: | 3 Flute 12mm Aluminum End Mill U Shape With DLC Coating |
---|---|
Flute Diameter: | 12mm |
Flute Length: | 36mm |
3 Flutes Taper Custom End Mill Conical Carbide For Titanium Alloy
Name: | Custom End Mill Taper Miliing Cutter |
---|---|
Center Cutting: | Yes |
Coating: | AlTiN Or Customized |
CNC Three Flute End Mill Flat End Mill Bit 3/8" 10mm 1/32" 1/8"
Product Name: | 3 Flute 10mm Square End Mill For Aluminium |
---|---|
Flute Dia: | 10mm |
Flute Length: | 30mm |
1mm 2mm Aluminium End Mill Cutter Hss HRC55 3 Flutes CNC Solid Carbide
Product Name: | HRC55 2mm Flat End Mill For Alu |
---|---|
Flute Dia: | 2mm |
Flute Length: | 6mm |
4 Flutes Single Flute Carbide End Mill 6mm 1/4" 1/8" HRC55
Product Name: | HRC55 4 Flutes 6mm Solid Carbide End Mill |
---|---|
Flute Diameter: | 6mm |
Flute Length: | 18mm |
1mm 1/25" 1/8" 1/16" 2 Flute End Mill Stainless Steel Tungsten Carbide Milling Bits For Jewelry
Product: | HRC60 2 Flute Solid Carbide End Mill 1mm |
---|---|
Raw Material: | GU25UF |
Diameter: | 1mm |
Solid Carbide 1/4 Inch End Mill Extra Long AlTiSiN Coating
Product Name: | Imperial Milling Cutters 1/4" End Mill |
---|---|
Diameter: | 1/4" |
Overall Length: | 2" |
10mm 3/8" Aluminum End Mill Hss Roughing With 3 Flute DLC Coating
Product Name: | HRC55 10mm High Efficiency Aluminum End Mill |
---|---|
Flute Dia: | 10mm |
Flute Length: | 30mm |
HRC50 3 Flute End Mill 1/2 Inch 12mm Extra Long Roughing End Mill Aluminum
Product Name: | HRC50 3 Flute 12mm Aluminum End Mill For Rough Milling |
---|---|
Flute Dia: | 12mm |
Flute Length: | 36mm |