All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ single flute end mill aluminum ] match 11 products.
1f Single Flute End Mill For Aluminum Plastic Wood Acrylic Carbide 1/4 Inch 6mm
Coating: | Uncoated/customized |
---|---|
Packaging Details: | One piece end mill in a plastic tube, ten pieces a bundle, then in carton. |
Delivery Time: | 5-8 work days |
3/8" 10mm Cnc Router Aluminium End Mill Corner Radius HRC50 3 Flute
Product Name: | HRC50 3 Flute Corner Radius Aluminum End Mill 10R2 |
---|---|
Flute Dia: | 10R2 |
Flute Length: | 30mm |
3/8" 5/16" 8mm Solid Carbide Roughing End Mill Coating For Aluminum 3 Flutes HRC50
Product Name: | HRC50 3 Flute 8mm Aluminum End Mill For Rough Milling |
---|---|
Flute Dia: | 8mm |
Flute Length: | 24mm |
13/32" 3/4" 3/8" Carbide Roughing End Mill For 6061 Aluminum 10mm Extra Long
Product Name: | HRC50 3 Flute 10mm Aluminum End Mill For Rough Milling |
---|---|
Flute Dia: | 10mm |
Flute Length: | 30mm |
4 Flutes Single Flute Carbide End Mill 6mm 1/4" 1/8" HRC55
Product Name: | HRC55 4 Flutes 6mm Solid Carbide End Mill |
---|---|
Flute Diameter: | 6mm |
Flute Length: | 18mm |
4 Flutes Corner Radius Cutter Solid Carbide Corner Rounding End Mill HRC60
Product: | HRC60 Corner Radius Cutter |
---|---|
Number Of Flute: | 4/customized |
Radius: | R0.2, R0.5, R1, R2 |
Tungsten Solid Carbide Flat End Mill Cutter 4 Flutes Imperial Milling HRC50
Type: | 4 Flutes Uncoated Square End Mill |
---|---|
Size: | Customized |
Material: | Tungsten Solid Carbide |
Bull Endmill 4 Flutes Solid Carbide Corner Radius End Mills HRC55
Product: | HRC55 4 Flutes Bull Endmill |
---|---|
Radius: | R0.2, R0.5, R1, R2 |
Material: | WF25 |
0.118" 3/32 Inch 3mm Hardened Steel End Mills With Corner Radius Cutter 1/4 Shank
Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
---|---|
Flute Number: | 4 |
Material: | GU092 GESAC |
Ball Nose Cutter 10mm 4F 3/8" 7/16" 5/16" Ball Nose End Mill For Titanium
Product Name: | Ball Nose Cutter For Titanium |
---|---|
Diameter: | 1-30mm |
Flute Length: | Customized |