All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ small end mill ] match 65 Products.
VIDEO
Carbide OEM Conical End Mill 3 Flutes Cnc Milling Cutter For Steel
| Name: | Carbide Conical End Mill |
|---|---|
| Center Cutting: | Yes |
| Coating: | AlTiN AlTiSiN DLC |
VIDEO
Solid Custom Carbide End Mills Metal Cutting Tool 2/3 Flute Taper With Coating
| Name: | Carbide Conical End Mill |
|---|---|
| Number Of Flutes: | 2/3/4 |
| Coating: | Customized |
VIDEO
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
VIDEO
10mm 3/8" Fine Pitch Roughing End Mill Carbide HRC60 4 Flutes
| Product Name: | HRC60 Roughing End Mill For Steel 10mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
VIDEO
Fine Pitch Roughing End Mills 18mm 3/4 Carbide Roughing End Mill 4fl
| Product Name: | HRC60 Roughing End Mill For Steel 18mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
2mm 10mm 1/8" 5/16" Extra Long End Mill With Radius Hss HRC65 4 Flutes
| Product: | HRC65 12R0.5 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Dia: | 12R0.5 |
| Flute Length: | 36mm |
VIDEO
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
| Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
|---|---|
| Diameter: | 1" |
| Overall Length: | 4" |
Aluminum Cutter 3/16" 13/16" 21mm 16mm 5/8 Roughing End Mill For Aluminium
| Product Name: | HRC50 3 Flute 16mm Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 16mm |
| Flute Length: | 45mm |
3 Flutes 20mm 13/16 Roughing End Mill Aluminum With Coarse Pitch
| Product Name: | HRC50 3 Flute 20mm Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 20mm |
| Flute Length: | 45mm |
VIDEO
Size Custom End Mill 4fl 1/2" Uncoated Carbide Ball End Mill Set
| Name: | Custom End Mill Roughing Ballnose End Mill |
|---|---|
| Type: | Custom End Mill |
| Number Of Flute: | 4/customized |