All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ solid carbide milling cutters ] match 119 products.
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
---|---|
Coating: | AlTiN Coating |
Raw Material: | GU25UF GESAC |
7mm 5/16" Solid Carbide Square End Mill Set Tool
Product Name: | Imperial Milling Cutters 5/16" End Mill |
---|---|
Diameter: | 5/16" |
Overall Length: | 2.5" |
16mm 5/8 Inch Roughing Imperial Milling Cutters Router Bit
Product Name: | HRC60 Roughing End Mill For Steel 5/8 Inch |
---|---|
Raw Material: | GU25UF Rod |
Diameter: | 5/8 Inch |
0.5" 12mm Two Flute End Mill Steel Tungsten Carbide Milling Cutters CNC
Product: | HRC50 2 Flute 12mm Carbide Flat Endmill |
---|---|
Raw Material: | ZY10EF |
Flute Number: | 2 |
1/25" 1mm Double Flute End Mill 2 Flute Milling Cutter Slot Mills
Product Name: | HRC55 2 Flute 1mm Solid Carbide End Mill |
---|---|
Flute Diameter: | 1mm |
Flute Length: | 3mm |
Slot Milling 1/8" 4mm End Mill Cutter 2 Flutes Solid Carbide
Product Name: | HRC55 2 Flute 4mm Solid Carbide End Mill |
---|---|
Flute Diameter: | 4mm |
Flute Length: | 12mm |
10mm 3/8" Solid Carbide End Mill Cutter 2 Flute For Slot Milling HRC55
Product Name: | HRC55 2 Flute 10mm Solid Carbide End Mill |
---|---|
Flute Diameter: | 10mm |
Flute Length: | 30mm |
Tungsten Solid Carbide Imperial Milling Cutters 4 Flutes Flat Endmills Uncoated
Type: | Imperial Milling Cutters |
---|---|
Size: | Customized |
Material: | Tungsten Solid Carbide |
Tungsten Solid Carbide Flat End Mill Cutter 4 Flutes Imperial Milling HRC50
Type: | 4 Flutes Uncoated Square End Mill |
---|---|
Size: | Customized |
Material: | Tungsten Solid Carbide |
1/2 Inch 1/8" Solid Carbide End Mill Acrylic 4Fl Imperial Milling Cutters AliTiN Coating
Product Name: | Imperial Milling Cutters 1/8" Square End Mill |
---|---|
Coating: | AlTiN/Customized |
Material: | YG10X |