All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 2 ] match 263 products.
VIDEO
1/2 Inch 12mm Ball Nose End Mill 30 Degree End Mill Cutter Drill Bit AlTiSiN Coating HRC55
| Product Name: | HRC55 2 Flutes 12mm Ball Nose End Mill |
|---|---|
| Diameter: | 12R6 |
| Flute Length: | 24mm |
0.039" 1mm 2 Flute End Mill Steel Iron AlTiN Coating 35 Helix Angle HRC50
| Product: | HRC50 Carbide 2 Flutes 1mm Square End Mill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
3/16" 5mm 2 Flute Hss End Mill 1/4 Inch Flat End Mill Bits 6mm Shank CNC
| Product: | HRC50 2 Flute 5mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
Hss 1/4" 6mm 2 Flute End Mill Flat Cnc Milling Bits AlTiN Coating HRC50
| Product: | HRC50 2 Flute 6mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
5/16" 2 Flute End Mill 8mm 4 Flute 2 Flute AlTiN Coating
| Product: | HRC50 2 Flute 8mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
6mm 10mm 3/8" Solid Carbide 2 Flute Straight End Mill
| Product: | HRC50 2 Flute 10mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
VIDEO
1/25" 1mm Double Flute End Mill 2 Flute Milling Cutter Slot Mills
| Product Name: | HRC55 2 Flute 1mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 1mm |
| Flute Length: | 3mm |
VIDEO
Slot Milling 1/8" 4mm End Mill Cutter 2 Flutes Solid Carbide
| Product Name: | HRC55 2 Flute 4mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 4mm |
| Flute Length: | 12mm |
VIDEO
5/16" 8mm 2 Flute End Mill Set For Slot Milling RLD Tools
| Product Name: | HRC55 2 Flutes 8mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 8mm |
| Flute Length: | 24mm |
VIDEO
10mm 3/8" Solid Carbide End Mill Cutter 2 Flute For Slot Milling HRC55
| Product Name: | HRC55 2 Flute 10mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 10mm |
| Flute Length: | 30mm |