All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 6mm solid carbide drill bit ] match 8 Products.
VIDEO
3/4" 3/8" 5/32" 7/32" Solid Carbide Drill Bits For Hardened Steel Cast Iron 2mm 4mm 6mm
| Product Name: | HRC55 Carbide Drill Bit |
|---|---|
| Coating: | AlTiSiN |
| Material: | Carbide |
VIDEO
.635" .0625" 1/8" 1/4" 1/2" Solid Carbide Twist Drill Bit Set 1/16" 1/8" 6mm 2mm
| Coating: | Customzied |
|---|---|
| Type: | Carbide Twist Drill Bit |
| Material: | Carbide |
.635" .0625" 1/8" 1/4" 1/2" Solid Carbide Step Drill Bit for Steel Aluminium 1/16" 6mm 2mm
| Brand: | RLD |
|---|---|
| Coating: | Uncoated/customized |
| Type: | Carbide Step Drill Bit |
VIDEO
RLD Solid Carbide End Mill Dlc Coated For Aluminum Endmill 6mm 1/4"
| Product Name: | RLD Solid Carbide New Design End Mill Dlc Coated For Aluminum |
|---|---|
| Controlling Mode: | Controlling Mode |
| Transportation: | Sea/Express/Air |
Solid Carbide Corner Radius Mill 6R0.2 4 Flutes High Hardness HRC65
| Product: | HRC65 Carbide Radius Mill |
|---|---|
| Number Of Flute: | 4 |
| Diameter: | 6mm |
VIDEO
6mm 5/16" 1/4" 2 Flute Carbide End Mill For Hardened Steel HRC60
| Product: | HRC60 2 Flute Solid Carbide End Mill 6mm |
|---|---|
| Raw Material: | GESAC GU25UF |
| Diameter: | 6 |
VIDEO
1/2 3 Flute End Mill 1/4" 6mm Aluminum Roughing End Mill For Steel Carbide
| Product Name: | HRC50 3 Flute Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 6mm |
| Flute Length: | 18mm |
VIDEO
6mm 3/4" 1/2 Inch 2 Flute End Mill For Stainless Steel Tatinium Cutting End Mills
| Product: | HRC60 2 Flute Solid Carbide End Mill 12mm |
|---|---|
| Raw Material: | GU25UF Rod |
| Diameter: | 12 |
1