All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
WhatsApp :
+8613685240516
CNC Machine CarbideTaper End Mill Cutting Tools T-slot End Milling Cutter Customized CNC Tools
Name: | T-slot End Milling Cutter |
---|---|
Type: | Gear Milling Cutter |
Coating: | AlTiN Coating |
6 Flutes Taper T Slot Cutter Router Bit Carbide End Mill Gear Milling Cutter Module
Name: | T Slot Milling Cutter |
---|---|
Type: | Gear Milling Cutter |
Coating: | AlTiN |
6 Flutes Carbide Taper T Groove Tools for Mold Processing Custom End Mill
Name: | 6 Flute T Slot End Mill |
---|---|
Type: | Custom End Mill T Groove |
Coating: | AlTiN |
21mm Aluminum End Mill 45 Degree 3 Flutes Polished Solid Carbide Endmills From China
Product Name: | Aluminum End Mill |
---|---|
Coating: | Uncoating |
Helix: | 45 Degree |
High Efficiency Tungsten Solid Carbide Ballnose End Mill 4 Flutes For Aluminum
Name: | 4 Flutes Ball Nose End Mill For Aluminum |
---|---|
Size: | Customized |
Coating: | DLC Coating |
3/16" 13/32" 5/8" Roughing End Mill For Stainless Steel Fine Pitch HRC60 4 Flutes
Product Name: | HRC60 Roughing End Mill For Steel 16mm |
---|---|
Coating: | AlTiN |
Raw Material: | GU25UF |
5/16" 8mm 4 Flute Roughing End Mill Aluminum HRC60 Fine Pitch For Stainless Steel
Product Name: | HRC60 Roughing End Mill For Steel 8mm |
---|---|
Coating: | AlTiN |
Raw Material: | GU25UF |
1/2" 12mm diamond roughing end mill For Stainless Steel Fine Pitch 4Fl HRC60
Product Name: | HRC60 Roughing End Mill For Steel 12mm |
---|---|
Coating: | AlTiN Coating |
Raw Material: | GU25UF GESAC |
20mm 18mm 3/4" 13/16" roughing end mills for aluminum Stainless Steel
Product Name: | HRC60 Roughing End Mill For Steel 20mm |
---|---|
Coating: | AlTiN Or Can Be Customized |
Raw Material: | GU25UF From GESA |
10mm 3/8" Fine Pitch Roughing End Mill Carbide HRC60 4 Flutes
Product Name: | HRC60 Roughing End Mill For Steel 10mm |
---|---|
Coating: | AlTiN |
Raw Material: | GU25UF |