All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ carbide end mill aluminum ] match 263 Products.
1/8" 4mm 4 Flutes Solid Carbide Corner Radius End Mills Radius Bull Nose Endmill HRC50
| Product: | HRC50 4 Flutes Corner Radius End Mill |
|---|---|
| Material: | ZY10EF |
| Coating: | AlTiN |
VIDEO
1/16" 3/32" 2.5mm Flat Nose End Mill Carbide Cutter HRC50 4 Flutes
| Product: | HRC50 2.5mm Carbide Square End Mill |
|---|---|
| Raw Material: | Carbide |
| Flutes: | 4 |
VIDEO
Diameter Custom End Mills Four 4 Flute Roughing End Mill Ball Nose Solid Milling Cutter
| Name: | Custom End Mill 4F Roughing Ballnos End Mill |
|---|---|
| Type: | Custom End Mill |
| Coating: | Blue Nano/customized |
VIDEO
Hard Steel Carbide Ball Nose End Mill 2 Flutes 6mm Shank Diameter
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R3 |
VIDEO
Solid Carbide 2 Flute Ball Nose End Mill 1mm HRC 50 For Steel Cnc Cutting Tools
| Coating: | AlTiN |
|---|---|
| Type: | Ball Nose End Mill |
| Material: | Carbide |
VIDEO
3/32" 4 Mm 3mm 4 Flute End Mill Bit 1/4" Square End Mill For Cast Iron
| Product: | HRC50 Carbide Square End Mill |
|---|---|
| Raw Material: | Carbide |
| Flutes: | 4 |
3/8" 1/8" 1/4" Bull Nose End Mill Cutter 6mm Radius 0.5 HRC50 4 Flutes
| Product: | HRC50 4 Flutes Corner Radius End Mill |
|---|---|
| Flute Diameter: | 6R0.5 |
| Flute Length: | 15mm |
1/2" 3/8" Bull Nose End Mill Metric HRC50 4 Flutes
| Product: | HRC50 4 Flutes 10R1 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 10R1 |
| Flute Length: | 25mm |
10mm 3/8" Carbide Corner Radius End Mills For Cutting Hardened Steel 4 Flute HRC65 .125 Radius
| Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Diameter: | 10R0.5 |
| Flute Length: | 25mm |
0.118" 3/32 Inch 3mm Hardened Steel End Mills With Corner Radius Cutter 1/4 Shank
| Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Number: | 4 |
| Material: | GU092 GESAC |