All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ solid carbide milling cutters ] match 119 Products.
VIDEO
3/8" 1/8" Uncoated Solid Carbide Ball End Mill For Stainless Steel 2 Flute
| Product Name: | HRC50 Imperial Milling Cutters 2F Ballnose End Mill |
|---|---|
| Diameter: | 1/16" |
| Flute Length: | 1/8" |
VIDEO
3/4" 3/64" 3/32" 12mm 3/8 Solid Carbide End Mill 3 Flute 4 Flute HRC55
| Product Name: | HRC55 4 Flutes 12mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 12mm |
| Flute Length: | 36mm |
VIDEO
9/64" 9/32" 8mm 3/4 Solid Carbide End Mill For Aluminum HRC55 4 Flute
| Product Name: | HRC55 4 Flutes 8mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 8mm |
| Flute Length: | 24mm |
VIDEO
0.039" 1mm Variable Helix Carbide End Mill For Aluminum HRC60 4 Flute CNC
| Product: | HRC60 Solid Carbide End Mill1mm |
|---|---|
| Packaging Details: | One piece end mill in a plastic tube, ten pieces a bundle, then in carton. |
| Delivery Time: | 5-7 work days |
VIDEO
21mm Aluminum End Mill 45 Degree 3 Flutes Polished Solid Carbide
| Product Name: | Aluminum End Mill |
|---|---|
| Coating: | Uncoating |
| Helix: | 45 Degree |
VIDEO
Metric End Mill 3 Flute Carbide Roughing End Mills For Wood CNC Milling Cutter
| Product Name: | HRC50 Roughing End Mills For Wood |
|---|---|
| Coating: | Uncoated/DLC Coating |
| Raw Material: | ZY10EF |
VIDEO
3 Mm 12mm 6mm Tungsten Carbide End Mill Aluminum Milling Cutter CNC HRC50 3 Flute
| Product Name: | 3 Flute 12mm Square End Mill For Aluminium |
|---|---|
| Flute Dia: | 12mm |
| Flute Length: | 36mm |
VIDEO
30 Degree Helix 3mm Ball Nose End Mill Cutter 2 Flute
| Product Name: | HRC50 2 Flutes 3mm Ball Nose End Mill |
|---|---|
| Diameter: | 3R1.5 |
| Flute Length: | 6mm |
1/8" 1/16" 2mm Solid Carbide End Mill 2 Flute Side Milling Cutter General Purpose HRC50
| Product: | HRC50 2 Flute 2mm Carbide Square Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
Hss 1/4" 6mm 2 Flute End Mill Flat Cnc Milling Bits AlTiN Coating HRC50
| Product: | HRC50 2 Flute 6mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |