All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ aluminum cutting end mills ] match 217 Products.
VIDEO
3/8" 10mm Cnc Router Aluminium End Mill Corner Radius HRC50 3 Flute
| Product Name: | HRC50 3 Flute Corner Radius Aluminum End Mill 10R2 |
|---|---|
| Flute Dia: | 10R2 |
| Flute Length: | 30mm |
VIDEO
Metric End Mill 3 Flute Carbide Roughing End Mills For Wood CNC Milling Cutter
| Product Name: | HRC50 Roughing End Mills For Wood |
|---|---|
| Coating: | Uncoated/DLC Coating |
| Raw Material: | ZY10EF |
VIDEO
Hrc65 Cnc Machine Custom End Mill Mirco Grain Carbide
| Name: | T-slot End Milling Cutter |
|---|---|
| Type: | Gear Milling Cutter |
| Coating: | AlTiN Coating |
CNC Three Flute End Mill Flat End Mill Bit 3/8" 10mm 1/32" 1/8"
| Product Name: | 3 Flute 10mm Square End Mill For Aluminium |
|---|---|
| Flute Dia: | 10mm |
| Flute Length: | 30mm |
2 Or 4 Flute End Mill For Aluminum 3/8" 1/8" Carbide Flat End Mill Cutter 4mm
| Product: | HRC50 2 Flute 4mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF Zhangyuan |
| Flute Number: | 2 |
VIDEO
4mm 3/8" 4 Flute Carbide End Mill Bit 10mm Extra Long Series End Mill
| Product Name: | HRC55 4 Flutes 10mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 10mm |
| Flute Length: | 30mm |
VIDEO
11/64" 3mm 1/8" 6mm 1/4" Carbide End Mill For Aluminum Four Flute HRC60
| Product: | HRC60 Solid Carbide End Mill 6mm |
|---|---|
| Packaging Details: | One piece end mill in a plastic tube, ten pieces a bundle, then in carton. |
| Delivery Time: | 5-7 work days |
VIDEO
10mm 3/8 Roughing End Mill Carbide HRC55
| Product Name: | HRC55 Roughing End Mill 10mm |
|---|---|
| Coating: | AlTiSiN/Customized |
| Raw Material: | WF25 CB Carbide |
VIDEO
1mm 1/25" 1/8" 1/16" 2 Flute End Mill Stainless Steel Tungsten Carbide Milling Bits For Jewelry
| Product: | HRC60 2 Flute Solid Carbide End Mill 1mm |
|---|---|
| Raw Material: | GU25UF |
| Diameter: | 1mm |
VIDEO
0.472" 1/2" 12mm Hss Corner Radius End Mill Bits For Steel Radius Milling Tool
| Product: | HRC60 Corner Radius End Mill 12R0.5 |
|---|---|
| Flute Diameter: | 12R0.5 |
| Flute Length: | 30mm |