All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ carbide end mills for aluminum ] match 263 Products.
5/32" 5/16" 1/4" Corner Radius End Mill 3mm 4mm 8mm Flat 4 Flutes
| Product: | HRC65 4R0.5 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Dia: | 4R0.5 |
| Flute Length: | 10mm |
VIDEO
10mm 3/8" Square Solid Carbide End Mill Cutting Tool Imperial Milling 4 Flutes HRC50
| Product Name: | Imperial Milling Cutters 3/8" End Mill Bits |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |
VIDEO
General Purpose Imperial Milling Cutters 12mm 4F 1/2" 1/4" Square End Mill Bits Set
| Product Name: | Imperial Milling Cutters 1/2" End Mill Cutter |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |
VIDEO
.050" 2mm Corner Radius End Mill Cnc Milling Bits HRC60 4 Flute
| Product: | HRC60 Corner Radius End Mill 8R2 |
|---|---|
| Flute Diameter: | 8R2 |
| Flute Length: | 20mm |
VIDEO
2 Flutes Ball Nose End Mill 2mm 30 Degree For High Hardness Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.0 |
| Flute Length: | 4mm |
VIDEO
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.25 |
| Flute Length: | 5mm |
2 Flutes Ball Nose End Mill Hrc65 1/4" 6mm For Heated Die Steel
| Product Name: | HRC65 2 Flutes Ball Nose End Mill |
|---|---|
| Helix Angle: | 30 |
| Coating: | Blue Nano Coating |
6 Flutes T Slot Custom Ground End Mills Cutter Carbide Alloy Tungsten Steel Slotting Cnc
| Name: | T Slot Carbide End Mill |
|---|---|
| Type: | Slot Milling Cutter |
| Coating: | AlTiN AlTiSiN Or Customized |
VIDEO
2mm Ball Nose End Mill Cnc Ball Nose Milling Cutter 2 Flute HRC50
| Product Name: | HRC50 2 Flutes 2mm Ball Nose End Mill |
|---|---|
| Diameter: | 2R1 |
| Flute Length: | 4mm |
VIDEO
30 Degree Helix 3mm Ball Nose End Mill Cutter 2 Flute
| Product Name: | HRC50 2 Flutes 3mm Ball Nose End Mill |
|---|---|
| Diameter: | 3R1.5 |
| Flute Length: | 6mm |