All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ cnc end mill bits ] match 95 products.
3/4" 3/32" 3/8" Ball Nose End Mill For Engraving Silicon Dioxide Titanium Nitride Coating
Product Name: | HRC60 Ball Nose End Mill 10R5 |
---|---|
Diameter: | 10R5 |
Flute Length: | 20mm |
8mm 1/4" 5/16 Roughing End Mills For Steel HRC55
Product Name: | HRC55 Roughing End Mill 8mm |
---|---|
Coating: | AlTiSiN |
Raw Material: | WF25 |
10mm 3/8 Roughing End Mill Carbide HRC55
Product Name: | HRC55 Roughing End Mill 10mm |
---|---|
Coating: | AlTiSiN/Customized |
Raw Material: | WF25 CB Carbide |
7mm 5/16" Solid Carbide Square End Mill Set Tool
Product Name: | Imperial Milling Cutters 5/16" End Mill |
---|---|
Diameter: | 5/16" |
Overall Length: | 2.5" |
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
---|---|
Coating: | AlTiN Coating |
Raw Material: | GU25UF GESAC |
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Diameter: | R1.5 |
Flute Length: | 6mm |
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Diameter: | R1.25 |
Flute Length: | 5mm |
Titanium Carbide Ball Nose End Mill HRC65 10mm Shank Diameter 2 Flutes
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Brand: | RLD |
Diameter: | R5 |
Altin Coating T Slot Custom Tapered End Mills Oem Design
Name: | T Slot Milling Cutter |
---|---|
Type: | Gear Milling Cutter |
Coating: | AlTiN |
5/8" 3/32" 3mm 2 Flute End Mill For Plastic Stainless Steel 304
Product: | HRC60 2 Flute Solid Carbide End Mill 3mm |
---|---|
Raw Material: | GU25UF Carbide |
Diameter: | 3 |