All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ custom diameter end mills ] match 25 Products.
VIDEO
AlTiN Coating 4mm Solid Carbide Ball Nose End Mill 8mm 2 Flutes 3D Milling
| Product Name: | HRC50 2 Flutes 4mm Ball Nose End Mill |
|---|---|
| Diameter: | 4R2 |
| Flute Length: | 8mm |
VIDEO
30 Helix Altin Coated End Mill Ball Nose 10mm Carbide End Mill
| Product Name: | HRC55 2 Flutes 10mm Ball Nose End Mill |
|---|---|
| Diameter: | 10R5 |
| Flute Length: | 20mm |
VIDEO
1/2 Inch 12mm Ball Nose End Mill 30 Degree End Mill Cutter Drill Bit AlTiSiN Coating HRC55
| Product Name: | HRC55 2 Flutes 12mm Ball Nose End Mill |
|---|---|
| Diameter: | 12R6 |
| Flute Length: | 24mm |
VIDEO
4mm Carbide End Mill 4 Flute 1/8" For Steel HRC55 RLD Tools
| Product Name: | HRC55 4 Flutes 4mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 4mm |
| Flute Length: | 12mm |
VIDEO
8mm 4F 9/16" 7/16" 5/16" Ball Nose End Mill Steel Cnc Ball Nose Bit
| Product Name: | HRC50 4 Flutes Ball Nose End Mill 8mm |
|---|---|
| Diameter: | 8mm |
| Flute Length: | 16mm |
VIDEO
General Purpose Imperial Milling Cutters 12mm 4F 1/2" 1/4" Square End Mill Bits Set
| Product Name: | Imperial Milling Cutters 1/2" End Mill Cutter |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |
Bull Endmill 4 Flutes Solid Carbide Corner Radius End Mills HRC55
| Product: | HRC55 4 Flutes Bull Endmill |
|---|---|
| Radius: | R0.2, R0.5, R1, R2 |
| Material: | WF25 |
VIDEO
4 Flutes Corner Radius Cutter Solid Carbide Corner Rounding End Mill HRC60
| Product: | HRC60 Corner Radius Cutter |
|---|---|
| Number Of Flute: | 4/customized |
| Radius: | R0.2, R0.5, R1, R2 |
VIDEO
30 Degree Helix 3mm Ball Nose End Mill Cutter 2 Flute
| Product Name: | HRC50 2 Flutes 3mm Ball Nose End Mill |
|---|---|
| Diameter: | 3R1.5 |
| Flute Length: | 6mm |
VIDEO
8mm Metric Ball Nose End Mills 5/16" .030" .031" Ball End Mill For Cutting Steel Aluminum
| Product Name: | HRC55 2 Flutes 8mm Ball Nose End Mill |
|---|---|
| Diameter: | 8R4 |
| Flute Length: | 16mm |