All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 1 8 carbide reamer ] match 43 Products.
VIDEO
1/8" 1/4" .250" Carbide Reamer Drill Bits Cutting Tools 3mm 6mm 8mm 12mm
| Product: | Customized Carbide Reamer |
|---|---|
| Flute Type: | Straight Flute |
| Flute Number: | 4 |
VIDEO
1/4" Extra Roughing Carbide End Mill For Brass Aluminum Uncoated HRC50 3fl
| Product Name: | HRC50 Roughing End Mill For Aluminum |
|---|---|
| Coating: | Uncoated/customized |
| Raw Material: | YG10X Carbide |
0.393" 3/8 Large Cobalt Carbide Roughing End Mill
| Product Name: | HRC50 3 Flutes Roughing End Mill For Aluminum |
|---|---|
| Coating: | Uncoated/customized |
| Raw Material: | YG10X Carbide |
VIDEO
10mm 3/8 Roughing End Mill Carbide HRC55
| Product Name: | HRC55 Roughing End Mill 10mm |
|---|---|
| Coating: | AlTiSiN/Customized |
| Raw Material: | WF25 CB Carbide |
Solid Carbide Corner Radius Mill 6R0.2 4 Flutes High Hardness HRC65
| Product: | HRC65 Carbide Radius Mill |
|---|---|
| Number Of Flute: | 4 |
| Diameter: | 6mm |
VIDEO
5/8" 5/16" 3/16" Solid Carbide Drill Bit Set For Hardened Steel 2 Flutes
| Product Name: | Carbide Drill Bit For Hardened Steel |
|---|---|
| Coating: | TiSiN |
| Material: | Carbide |
VIDEO
6mm 5/16" 1/4" 2 Flute Carbide End Mill For Hardened Steel HRC60
| Product: | HRC60 2 Flute Solid Carbide End Mill 6mm |
|---|---|
| Raw Material: | GESAC GU25UF |
| Diameter: | 6 |
VIDEO
8mm 5/16" 3/16" 2 Flute Carbide End Mill For Steel Hss Slot Milling Cutter 1.5"
| Product: | HRC60 2 Flute Solid Carbide End Mill 8mm |
|---|---|
| Raw Material: | GESAC GU25UF |
| Diameter: | 8 |
VIDEO
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
| Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
|---|---|
| Diameter: | 1" |
| Overall Length: | 4" |
VIDEO
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
| Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
|---|---|
| Diameter: | 1" |
| Overall Length: | 4" |