All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 1 4 carbide reamer ] match 43 products.
VIDEO
8mm 5/16" 3/16" 2 Flute Carbide End Mill For Steel Hss Slot Milling Cutter 1.5"
| Product: | HRC60 2 Flute Solid Carbide End Mill 8mm |
|---|---|
| Raw Material: | GESAC GU25UF |
| Diameter: | 8 |
18mm 3/4" Imperial Carbide End Mills 30 Degree 4f Square Nose End Mill HRC55
| Product Name: | Imperial Milling Cutters 3/4" End Mill |
|---|---|
| Diameter: | 3/4" |
| Overall Length: | 4" |
VIDEO
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
VIDEO
Carbide 2 Flutes Ball Nose End Mill HRC65 4mm 1/8 Inch For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R2 |
VIDEO
Long Carbide Ball Nose End Mill HRC65 12mm 1/2 Inch 2 Flutes For Die Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R6 |
VIDEO
HRC65 2 Flutes Carbide Ball Nose End Mill 10mm Extra Long For Tool Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R5 |
VIDEO
1mm 1/25" 1/8" 1/16" 2 Flute End Mill Stainless Steel Tungsten Carbide Milling Bits For Jewelry
| Product: | HRC60 2 Flute Solid Carbide End Mill 1mm |
|---|---|
| Raw Material: | GU25UF |
| Diameter: | 1mm |
VIDEO
Variable Helix 1/16" 2mm 2 Flute End Mill For Steel 304 Stainless Steel Cutting
| Product: | HRC60 2 Flute Solid Carbide End Mill 2mm |
|---|---|
| Raw Material: | GU25UF |
| Diameter: | 2mm |
VIDEO
3/8" 3mm 4mm 1/8" 2 Flute End Mill For Stainless Steel 316
| Product: | HRC60 2 Flute Solid Carbide End Mill 4mm |
|---|---|
| Raw Material: | GU25UF Rod |
| Diameter: | 4 |
VIDEO
6mm 3/4" 1/2 Inch 2 Flute End Mill For Stainless Steel Tatinium Cutting End Mills
| Product: | HRC60 2 Flute Solid Carbide End Mill 12mm |
|---|---|
| Raw Material: | GU25UF Rod |
| Diameter: | 12 |