All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
Keywords [ 1 8 carbide reamer ] match 43 products.
VIDEO
1/8" 1/4" .250" Carbide Reamer Drill Bits Cutting Tools 3mm 6mm 8mm 12mm
| Product: | Customized Carbide Reamer |
|---|---|
| Flute Type: | Straight Flute |
| Flute Number: | 4 |
2 Or 4 Flute End Mill For Aluminum 3/8" 1/8" Carbide Flat End Mill Cutter 4mm
| Product: | HRC50 2 Flute 4mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF Zhangyuan |
| Flute Number: | 2 |
VIDEO
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
| Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
|---|---|
| Diameter: | 1" |
| Overall Length: | 4" |
VIDEO
Carbide 2 Flutes Ball Nose End Mill HRC65 4mm 1/8 Inch For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R2 |
VIDEO
1mm 1/25" 1/8" 1/16" 2 Flute End Mill Stainless Steel Tungsten Carbide Milling Bits For Jewelry
| Product: | HRC60 2 Flute Solid Carbide End Mill 1mm |
|---|---|
| Raw Material: | GU25UF |
| Diameter: | 1mm |
VIDEO
3/8" 3mm 4mm 1/8" 2 Flute End Mill For Stainless Steel 316
| Product: | HRC60 2 Flute Solid Carbide End Mill 4mm |
|---|---|
| Raw Material: | GU25UF Rod |
| Diameter: | 4 |
VIDEO
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
| Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
|---|---|
| Diameter: | 1" |
| Overall Length: | 4" |
VIDEO
1/4" Extra Roughing Carbide End Mill For Brass Aluminum Uncoated HRC50 3fl
| Product Name: | HRC50 Roughing End Mill For Aluminum |
|---|---|
| Coating: | Uncoated/customized |
| Raw Material: | YG10X Carbide |
0.393" 3/8 Large Cobalt Carbide Roughing End Mill
| Product Name: | HRC50 3 Flutes Roughing End Mill For Aluminum |
|---|---|
| Coating: | Uncoated/customized |
| Raw Material: | YG10X Carbide |
VIDEO
1/2 3 Flute End Mill 1/4" 6mm Aluminum Roughing End Mill For Steel Carbide
| Product Name: | HRC50 3 Flute Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 6mm |
| Flute Length: | 18mm |