All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 6 flute carbide end mill ] match 263 Products.
VIDEO
0.472" 1/2" 12mm Hss Corner Radius End Mill Bits For Steel Radius Milling Tool
| Product: | HRC60 Corner Radius End Mill 12R0.5 |
|---|---|
| Flute Diameter: | 12R0.5 |
| Flute Length: | 30mm |
VIDEO
7mm 5/16" Solid Carbide Square End Mill Set Tool
| Product Name: | Imperial Milling Cutters 5/16" End Mill |
|---|---|
| Diameter: | 5/16" |
| Overall Length: | 2.5" |
VIDEO
10mm 0.393" Metric Full Radius End Mill Bits For Metal Radius Mill Cutter
| Product: | HRC60 Corner Radius End Mill 10R0.5 |
|---|---|
| Flute Diameter: | 10R0.5 |
| Flute Length: | 25mm |
VIDEO
1/2" 12mm diamond roughing end mill For Stainless Steel Fine Pitch 4Fl HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 12mm |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
1/2" 3/8" Bull Nose End Mill Metric HRC50 4 Flutes
| Product: | HRC50 4 Flutes 10R1 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 10R1 |
| Flute Length: | 25mm |
2 Or 4 Flute End Mill For Aluminum 3/8" 1/8" Carbide Flat End Mill Cutter 4mm
| Product: | HRC50 2 Flute 4mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF Zhangyuan |
| Flute Number: | 2 |
5/32" 5/16" 1/4" Corner Radius End Mill 3mm 4mm 8mm Flat 4 Flutes
| Product: | HRC65 4R0.5 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Dia: | 4R0.5 |
| Flute Length: | 10mm |
VIDEO
10mm 3/8" Aluminum End Mill Hss Roughing With 3 Flute DLC Coating
| Product Name: | HRC55 10mm High Efficiency Aluminum End Mill |
|---|---|
| Flute Dia: | 10mm |
| Flute Length: | 30mm |
VIDEO
Hard Steel Carbide Ball Nose End Mill 2 Flutes 6mm Shank Diameter
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R3 |