All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 6 flute carbide end mill ] match 263 products.
VIDEO
12mm 1/2 Inch Aluminum Roughing End Mill 3 Flutes Cnc Endmills
| Coating: | Uncoated/Customized |
|---|---|
| Type: | 3 Flutes Aluminum Roughing End Mill |
| Material: | Carbide |
3/16" 1/4" 1/2" Corner Radius End Mill Cutter 4 Flute 12mm For Stainless Steel AlTiN Coating
| Product: | HRC50 4 Flutes 12R1 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 12R1 |
| Flute Length: | 30mm |
4 Flute .2362 6mm Corner Radius End Mill 1/4" Shank HRC55
| Product: | HRC55 4 Flutes 6R0.5 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 6R0.5 |
| Flute Length: | 15mm |
VIDEO
1mm 1/25" 2mm 1/8" 4 Flute End Mill Aluminum Alloy Steel TiSiN Coating
| Product: | HRC55 4 Flutes 1mm Flat Endmill |
|---|---|
| Flute Diameter: | 1mm |
| Flute Length: | 3mm |
VIDEO
2mm Cnc Router End Mill Bits For Aluminum Ball Nose HRC50 2 Flute
| Product Name: | HRC50 2 Flute Ball Nose Aluminum End Mill 2R1 |
|---|---|
| Flute Dia: | 2R1 |
| Flute Length: | 2mm |
VIDEO
Ball Nose High Feed Aluminum End Mill For Router 2 Flute 1/4" 1/8"
| Product Name: | HRC50 2 Flute Ball Nose Aluminum End Mill 4R2 |
|---|---|
| Flute Dia: | 4R2 |
| Flute Length: | 8mm |
10mm 3/8" Carbide Corner Radius End Mills For Cutting Hardened Steel 4 Flute HRC65 .125 Radius
| Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Diameter: | 10R0.5 |
| Flute Length: | 25mm |
0.118" 3/32 Inch 3mm Hardened Steel End Mills With Corner Radius Cutter 1/4 Shank
| Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Number: | 4 |
| Material: | GU092 GESAC |
VIDEO
1/8" Aluminum Finishing End Mill 4mm 3 Flute Cutting RLD Tools
| Product Name: | HRC55 4mm High Efficiency Aluminum End Mill |
|---|---|
| Flute Dia: | 4mm |
| Flute Length: | 12mm |
VIDEO
16mm 14mm 9/16" Roughing End Mill For Aluminium Cutting End Mills 3 Flutes
| Product Name: | HRC50 3 Flute 14mm Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 14mm |
| Flute Length: | 45mm |