All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ carbide end mill aluminum ] match 263 Products.
VIDEO
2 Flutes Ball Nose End Mill 2mm 30 Degree For High Hardness Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.0 |
| Flute Length: | 4mm |
6 Flutes T Slot Custom Ground End Mills Cutter Carbide Alloy Tungsten Steel Slotting Cnc
| Name: | T Slot Carbide End Mill |
|---|---|
| Type: | Slot Milling Cutter |
| Coating: | AlTiN AlTiSiN Or Customized |
VIDEO
2mm Ball Nose End Mill Cnc Ball Nose Milling Cutter 2 Flute HRC50
| Product Name: | HRC50 2 Flutes 2mm Ball Nose End Mill |
|---|---|
| Diameter: | 2R1 |
| Flute Length: | 4mm |
VIDEO
30 Degree Helix 3mm Ball Nose End Mill Cutter 2 Flute
| Product Name: | HRC50 2 Flutes 3mm Ball Nose End Mill |
|---|---|
| Diameter: | 3R1.5 |
| Flute Length: | 6mm |
VIDEO
10mm 3/8" Fine Pitch Roughing End Mill Carbide HRC60 4 Flutes
| Product Name: | HRC60 Roughing End Mill For Steel 10mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
VIDEO
3/16" 13/32" 5/8" Roughing End Mill For Stainless Steel Fine Pitch HRC60 4 Flutes
| Product Name: | HRC60 Roughing End Mill For Steel 16mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
VIDEO
10mm 3/8" Square Solid Carbide End Mill Cutting Tool Imperial Milling 4 Flutes HRC50
| Product Name: | Imperial Milling Cutters 3/8" End Mill Bits |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
VIDEO
1mm 3mm 1/32" 1/16" 3/16" Corner Radius End Mill Bits For CNC Milling Machine HRC60
| Product: | HRC60 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 1R0.2 |
| Flute Length: | 2.5mm |
3/32" 5/8" Corner Radius Cutting End Mill For CNC
| Product: | HRC60 Corner Radius End Mill 2R0.5 |
|---|---|
| Flute Diameter: | 2R0.5 |
| Flute Length: | 5mm |