All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
Keywords [ cnc end mill bits ] match 95 products.
1/2" 12mm Solid Carbide Roughing End Mills For Steel
Product Name: | HRC55 Roughing End Mill 12mm |
---|---|
Coating: | AlTiSiN/Others |
Raw Material: | WF25 |
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
---|---|
Diameter: | 1" |
Overall Length: | 4" |
1/2 3 Flute End Mill 1/4" 6mm Aluminum Roughing End Mill For Steel Carbide
Product Name: | HRC50 3 Flute Aluminum End Mill For Rough Milling |
---|---|
Flute Dia: | 6mm |
Flute Length: | 18mm |
3/8" 5/16" 8mm Solid Carbide Roughing End Mill Coating For Aluminum 3 Flutes HRC50
Product Name: | HRC50 3 Flute 8mm Aluminum End Mill For Rough Milling |
---|---|
Flute Dia: | 8mm |
Flute Length: | 24mm |
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Diameter: | R1.5 |
Flute Length: | 6mm |
Carbide 2 Flutes Ball Nose End Mill HRC65 4mm 1/8 Inch For Hard Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Brand: | RLD |
Diameter: | R2 |
3/4" 3/32" 3/8" Ball Nose End Mill For Engraving Silicon Dioxide Titanium Nitride Coating
Product Name: | HRC60 Ball Nose End Mill 10R5 |
---|---|
Diameter: | 10R5 |
Flute Length: | 20mm |
0.393" 3/8 Large Cobalt Carbide Roughing End Mill
Product Name: | HRC50 3 Flutes Roughing End Mill For Aluminum |
---|---|
Coating: | Uncoated/customized |
Raw Material: | YG10X Carbide |
8mm 1/4" 5/16 Roughing End Mills For Steel HRC55
Product Name: | HRC55 Roughing End Mill 8mm |
---|---|
Coating: | AlTiSiN |
Raw Material: | WF25 |
10mm 3/8 Roughing End Mill Carbide HRC55
Product Name: | HRC55 Roughing End Mill 10mm |
---|---|
Coating: | AlTiSiN/Customized |
Raw Material: | WF25 CB Carbide |