All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
HRC50 1/2 4 Flute Carbide Roughing End Mills For Steel Or Aluminum
| Product Name: | HRC50 Roughing End Mills For Aluminum & Steel |
|---|---|
| Coating: | Uncoated/Customized Coating |
| Raw Material: | Also Can Be Customized As Per Your Material |
VIDEO
Metric End Mill 3 Flute Carbide Roughing End Mills For Wood CNC Milling Cutter
| Product Name: | HRC50 Roughing End Mills For Wood |
|---|---|
| Coating: | Uncoated/DLC Coating |
| Raw Material: | ZY10EF |
VIDEO
HRC50 Inch Size Carbide 3 Flute Roughing End Mill For Aluminum Or Soft Metal
| Product Name: | HRC50 3 Flutes Roughing End Mills |
|---|---|
| Coating: | Uncoated/DLC Coating |
| Cutting Direction: | Right Hand |
VIDEO
5/8 Inch 16mm Long 3 Flutes Aluminum End Mill Solid Carbide Roughing Endmill
| Product Name: | HRC50 Aluminum End Mill For Rough Milling |
|---|---|
| Flute Number: | 4 |
| Application: | Aluminum, Copper, Etc |
HRC65 Mirror Surface Aluminum End Mill 4 Flutes Ballnose Endmill With DLC Coating
| Product Name: | HRC65 Mirror Surface Aluminum End Mill 4 Flutes Ballnose Endmill |
|---|---|
| Flute Dia: | 10mm |
| Flute Length: | 20mm |
VIDEO
Unequal Pitch HRC60 CNC Milling Cutter 4 Flute End Mill For Stainless Steel
| Product: | HRC60 Flat Carbide Endmill |
|---|---|
| Raw Material: | GU25UF From GESAC |
| Flutes: | 4 |
2 Flutes Ball Nose End Mill Hrc65 1/4" 6mm For Heated Die Steel
| Product Name: | HRC65 2 Flutes Ball Nose End Mill |
|---|---|
| Helix Angle: | 30 |
| Coating: | Blue Nano Coating |
VIDEO
Uncoated Silver Aluminum Imperial Milling Cutters Square End Mill
| Coating: | Uncoated/Customized |
|---|---|
| Type: | Square End Mill |
| Material: | Carbide |
VIDEO
Tungsten Solid Carbide Flat End Mill Cutter 4 Flutes Imperial Milling HRC50
| Type: | 4 Flutes Uncoated Square End Mill |
|---|---|
| Size: | Customized |
| Material: | Tungsten Solid Carbide |
VIDEO
Tungsten Solid Carbide Imperial Milling Cutters 4 Flutes Flat Endmills Uncoated
| Type: | Imperial Milling Cutters |
|---|---|
| Size: | Customized |
| Material: | Tungsten Solid Carbide |