All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 2 ] match 263 products.
VIDEO
7mm 12mm 1/2" 6mm 3/16" 3 Flute End Mill Roughing Square End Mill CNC
| Product Name: | 3 Flutes 6mm Square End Mill For Aluminium |
|---|---|
| Flute Dia: | 6mm |
| Flute Length: | 18mm |
VIDEO
12mm 1/2" End Mill Cutter For Aluminum 6061 Cnc Flat End Mills Bits For Cast No Milling Mark
| Product Name: | HRC55 12mm Square End Mill For Aluminum |
|---|---|
| Flute Dia: | 12mm |
| Flute Length: | 36mm |
VIDEO
1/2" 3/8" 1/4" 4 Flute Carbide End Mill Hrc 55 35 Degree Helix
| Product: | HRC50 4mm Carbide Square End Mill |
|---|---|
| Raw Material: | Carbide |
| Flutes: | 4 |
VIDEO
1/2" 1/4" 1/8 Inch Carbide Ball Nose End Mill For 304 Stainless 4mm
| Product Name: | HRC60 Ball Nose End Mill 4R2 |
|---|---|
| Diameter: | 4R2 |
| Flute Length: | 8mm |
VIDEO
1/8" 1/2 Ball Nose End Mill Cutter 12mm Carbide End Mill Bits For Aluminum
| Product Name: | HRC60 Ball Nose End Mill 12R6 |
|---|---|
| Packaging Details: | 1pcs endmill in a plastic pipe, ten pieces a rubber bundle, then in a carton. |
| Delivery Time: | 5-7 work days |
4Fl Diamond Ball Nose End Mill For Cutting Inconel 1/2 Shank
| Product Name: | HRC65 4 Flutes Ball Nose End Mill 12R6 |
|---|---|
| Diameter: | 12R6 |
| Flute Length: | 24mm |
VIDEO
16mm 2 Flutes Carbide Ball Nose Endmill Blue Coating For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R4 |
VIDEO
HRC65 2 Flutes Carbide Ball Nose End Mill 10mm Extra Long For Tool Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R5 |
VIDEO
1mm 3mm 1/32" 1/16" 3/16" Corner Radius End Mill Bits For CNC Milling Machine HRC60
| Product: | HRC60 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 1R0.2 |
| Flute Length: | 2.5mm |
VIDEO
General Purpose Imperial Milling Cutters 12mm 4F 1/2" 1/4" Square End Mill Bits Set
| Product Name: | Imperial Milling Cutters 1/2" End Mill Cutter |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |