All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 2 ] match 263 products.
VIDEO
HRC65 High Hardness 1.5mm 2 Flutes 30 Degree End Mill Carbide Ball Nose Endmill
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R0.75 |
| Flute Length: | 3mm |
VIDEO
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
VIDEO
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.25 |
| Flute Length: | 5mm |
2 Flutes Ball Nose End Mill Hrc65 1/4" 6mm For Heated Die Steel
| Product Name: | HRC65 2 Flutes Ball Nose End Mill |
|---|---|
| Helix Angle: | 30 |
| Coating: | Blue Nano Coating |
VIDEO
1/2" 12mm diamond roughing end mill For Stainless Steel Fine Pitch 4Fl HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 12mm |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
VIDEO
1/2" 12mm Solid Carbide Roughing End Mills For Steel
| Product Name: | HRC55 Roughing End Mill 12mm |
|---|---|
| Coating: | AlTiSiN/Others |
| Raw Material: | WF25 |
VIDEO
HRC50 3 Flute End Mill 1/2 Inch 12mm Extra Long Roughing End Mill Aluminum
| Product Name: | HRC50 3 Flute 12mm Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 12mm |
| Flute Length: | 36mm |
.635" .0625" 1/8" 1/4" 1/2" Solid Carbide Step Drill Bit for Steel Aluminium 1/16" 6mm 2mm
| Brand: | RLD |
|---|---|
| Coating: | Uncoated/customized |
| Type: | Carbide Step Drill Bit |
VIDEO
1 1/2 3 Flute Roughing End Mill For Aluminum Carbide HRC50
| Product Name: | HRC50 Roughing End Mills For Aluminum |
|---|---|
| Coating: | Uncoated/DLC Coating |
| Raw Material: | ZY10EF |
HRC50 1/2 4 Flute Carbide Roughing End Mills For Steel Or Aluminum
| Product Name: | HRC50 Roughing End Mills For Aluminum & Steel |
|---|---|
| Coating: | Uncoated/Customized Coating |
| Raw Material: | Also Can Be Customized As Per Your Material |