All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 2 ] match 263 products.
VIDEO
1/16" 3/32" 2.5mm Flat Nose End Mill Carbide Cutter HRC50 4 Flutes
| Product: | HRC50 2.5mm Carbide Square End Mill |
|---|---|
| Raw Material: | Carbide |
| Flutes: | 4 |
VIDEO
1/2 Inch 1/8" Solid Carbide End Mill Acrylic 4Fl Imperial Milling Cutters AliTiN Coating
| Product Name: | Imperial Milling Cutters 1/8" Square End Mill |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
VIDEO
12mm Solid Carbide End Mill Aluminum Imperial Carbide End Mill 1/2"
| Coating: | AlTiN |
|---|---|
| Type: | Square End Mill |
| Material: | Carbide |
VIDEO
2.5mm 5/32" Carbide End Mill Finishing 35 Degree
| Product Name: | Imperial Milling Cutters 5/32" End Mill |
|---|---|
| Coating: | AlTiSiN |
| Material: | WF25 |
VIDEO
RLD Making Custom End Mill Bit Set Customized Lollipop End Mill Cutter 2 Flute
| Name: | Custom End Mill Lollipop End Mill |
|---|---|
| Size: | As Per The Drawing |
| Number Of Flute: | 2 |
VIDEO
1/2" Radius 3 Flute 2 Flute Corner Radius End Mill For Aluminum Hss HRC50
| Product Name: | HRC50 2 Flute Solid Carbide Inner Corner Radius End Mill |
|---|---|
| Flute Dia: | NR4 |
| Overall Length: | 75mm |
VIDEO
2 Flutes Solid Carbide Drill Bit With Inner Coolant Hole For Stainless Steel
| Product Name: | 2 Flutes Solid Carbide Drill Bit With Inner Coolant Hole For Stainless Steel |
|---|---|
| Brand: | RLD/OEM |
| Coating: | Uncoated/customized |
VIDEO
3/8" 1/8" Uncoated Solid Carbide Ball End Mill For Stainless Steel 2 Flute
| Product Name: | HRC50 Imperial Milling Cutters 2F Ballnose End Mill |
|---|---|
| Diameter: | 1/16" |
| Flute Length: | 1/8" |
VIDEO
12mm 1/2" Imperial Milling Cutters For Steel Ball Nose Mill Bit Tool 2 Flute
| Product Name: | HRC50 Imperial Milling Cutters 2F Ballnose End Mill 1/2" |
|---|---|
| Diameter: | 1/2" |
| Flute Length: | 1" |