All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 3 16 carbide end mill ] match 184 Products.
5/16" 2 Flute End Mill 8mm 4 Flute 2 Flute AlTiN Coating
| Product: | HRC50 2 Flute 8mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
VIDEO
3/4" 3/32" 3/8" Ball Nose End Mill For Engraving Silicon Dioxide Titanium Nitride Coating
| Product Name: | HRC60 Ball Nose End Mill 10R5 |
|---|---|
| Diameter: | 10R5 |
| Flute Length: | 20mm |
VIDEO
1/8" 1/4" 1/16 Ball Nose CNC Router Bit 4 Flute End Mill Cutter Carbide
| Product Name: | HRC50 4 Flutes 2mm Ball Nose End Mill |
|---|---|
| Diameter: | 2mm |
| Flute Length: | 4mm |
VIDEO
4mm 1/8 Inch Diamond Ball End Mill For Steel 4 Flutes RLD Tools
| Product Name: | HRC50 4 Flutes Ball Nose End Mill 4mm |
|---|---|
| Diameter: | 4mm |
| Flute Length: | 8mm |
VIDEO
10mm 3/8 Carbide Ball Nose End Mill Cnc Router Bits 4 Flutes
| Product Name: | HRC50 4 Flutes Ball Nose End Mill 10mm |
|---|---|
| Diameter: | 10mm |
| Flute Length: | 20mm |
VIDEO
1/2" 12mm Solid Carbide Roughing End Mills For Steel
| Product Name: | HRC55 Roughing End Mill 12mm |
|---|---|
| Coating: | AlTiSiN/Others |
| Raw Material: | WF25 |
1/4" 6mm Ball Nose End Mill Hrc65 For Heated Mold Steel
| Product Name: | HRC65 Ball Nose End Mill 6R3 |
|---|---|
| Diameter: | 6R3 |
| Flute Length: | 12mm |
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
VIDEO
2 Flutes Ball Nose End Mill 2mm 30 Degree For High Hardness Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.0 |
| Flute Length: | 4mm |
VIDEO
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.25 |
| Flute Length: | 5mm |