All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ aluminum cutting end mills ] match 100 Products.
VIDEO
10mm 3/8" Fine Pitch Roughing End Mill Carbide HRC60 4 Flutes
| Product Name: | HRC60 Roughing End Mill For Steel 10mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
8mm 1/4" 5/16 Roughing End Mills For Steel HRC55
| Product Name: | HRC55 Roughing End Mill 8mm |
|---|---|
| Coating: | AlTiSiN |
| Raw Material: | WF25 |
VIDEO
5/8" 3/32" 3mm 2 Flute End Mill For Plastic Stainless Steel 304
| Product: | HRC60 2 Flute Solid Carbide End Mill 3mm |
|---|---|
| Raw Material: | GU25UF Carbide |
| Diameter: | 3 |
VIDEO
6mm 5/16" 1/4" 2 Flute Carbide End Mill For Hardened Steel HRC60
| Product: | HRC60 2 Flute Solid Carbide End Mill 6mm |
|---|---|
| Raw Material: | GESAC GU25UF |
| Diameter: | 6 |
VIDEO
8mm 5/16" 3/16" 2 Flute Carbide End Mill For Steel Hss Slot Milling Cutter 1.5"
| Product: | HRC60 2 Flute Solid Carbide End Mill 8mm |
|---|---|
| Raw Material: | GESAC GU25UF |
| Diameter: | 8 |
0.118" 3/32 Inch 3mm Hardened Steel End Mills With Corner Radius Cutter 1/4 Shank
| Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Number: | 4 |
| Material: | GU092 GESAC |
5/32" 5/16" 1/4" Corner Radius End Mill 3mm 4mm 8mm Flat 4 Flutes
| Product: | HRC65 4R0.5 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Dia: | 4R0.5 |
| Flute Length: | 10mm |
3/16" 1/8" 1/16" Metric Corner Radius End Mills Extra Long Reach End Mill HRC 65 4Fl
| Product: | HRC65 6R0.5 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Dia: | 6R0.5 |
| Flute Length: | 18mm |
1/4" 6mm Ball Nose End Mill Hrc65 For Heated Mold Steel
| Product Name: | HRC65 Ball Nose End Mill 6R3 |
|---|---|
| Diameter: | 6R3 |
| Flute Length: | 12mm |
VIDEO
7mm 5/16" Solid Carbide Square End Mill Set Tool
| Product Name: | Imperial Milling Cutters 5/16" End Mill |
|---|---|
| Diameter: | 5/16" |
| Overall Length: | 2.5" |