All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ carbide end mills for aluminum ] match 263 Products.
VIDEO
Fine Pitch Roughing End Mills 18mm 3/4 Carbide Roughing End Mill 4fl
| Product Name: | HRC60 Roughing End Mill For Steel 18mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
VIDEO
10mm 3/8" Fine Pitch Roughing End Mill Carbide HRC60 4 Flutes
| Product Name: | HRC60 Roughing End Mill For Steel 10mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
VIDEO
5/16" 8mm 4 Flute Roughing End Mill Aluminum HRC60 Fine Pitch For Stainless Steel
| Product Name: | HRC60 Roughing End Mill For Steel 8mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
VIDEO
10mm 3/8 Roughing End Mill Carbide HRC55
| Product Name: | HRC55 Roughing End Mill 10mm |
|---|---|
| Coating: | AlTiSiN/Customized |
| Raw Material: | WF25 CB Carbide |
VIDEO
1/8" 1/4" 1/16 Ball Nose CNC Router Bit 4 Flute End Mill Cutter Carbide
| Product Name: | HRC50 4 Flutes 2mm Ball Nose End Mill |
|---|---|
| Diameter: | 2mm |
| Flute Length: | 4mm |
VIDEO
DLC Coating 3 Flutes Aluminium Square End Mill U Groove Shaped
| Product Name: | 3 Flute 10mm Aluminum End Mill U Shape With DLC Coating |
|---|---|
| Flute Diameter: | 10mm |
| Flute Length: | 30mm |
VIDEO
High Efficiency U Shape 3 Flutes Aluminium End Mill DLC Coating Big Capacity
| Product Name: | High Efficiency U Shape 3 Flutes Aluminium End Mill DLC Coating Big Capacity |
|---|---|
| Flute Diameter: | Customized |
| Flute Length: | Customized |
3.57mm 9/64" Imperial End Mills Bits Extra Long Carbide 4 Flutes
| Product Name: | Imperial Milling Cutters 9/64" End Mill |
|---|---|
| Coating: | AlTiSiN/customized |
| Material: | WF25 CB |
VIDEO
1mm 4mm 1/2" 1/8 Inch Corner Radius End Mill And Cutter Standard
| Product: | HRC60 Corner Radius End Mill 3R0.5 |
|---|---|
| Flute Diameter: | 3R0.5 |
| Flute Length: | 7.5mm |