All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ carbide end mills for aluminum ] match 263 Products.
1/2" 3/8" Bull Nose End Mill Metric HRC50 4 Flutes
| Product: | HRC50 4 Flutes 10R1 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 10R1 |
| Flute Length: | 25mm |
VIDEO
3/4" 5/8" Metric Corner Rounding End Mill 10mm 1mm HRC55 4 Flutes
| Product: | HRC55 4 Flutes 12R0.5 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 12R0.5 |
| Flute Length: | 30mm |
0.039" 1mm 2 Flute End Mill Steel Iron AlTiN Coating 35 Helix Angle HRC50
| Product: | HRC50 Carbide 2 Flutes 1mm Square End Mill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
3/16" 5mm 2 Flute Hss End Mill 1/4 Inch Flat End Mill Bits 6mm Shank CNC
| Product: | HRC50 2 Flute 5mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
Hss 1/4" 6mm 2 Flute End Mill Flat Cnc Milling Bits AlTiN Coating HRC50
| Product: | HRC50 2 Flute 6mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
6mm 10mm 3/8" Solid Carbide 2 Flute Straight End Mill
| Product: | HRC50 2 Flute 10mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
0.5" 12mm Two Flute End Mill Steel Tungsten Carbide Milling Cutters CNC
| Product: | HRC50 2 Flute 12mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
1/8" 1/32" 1/16" Ball Nose End Mill Bits For Stainless Steel 304 1/4" Shank HRC60
| Product Name: | HRC60 Ball Nose End Mill 2R1 |
|---|---|
| Diameter: | 2R1 |
| Flute Length: | 4mm |
VIDEO
0.787" 20mm Hss Titanium Roughing End Mills Set HRC55 RLD Tools
| Product Name: | HRC55 Roughing End Mill 20mm |
|---|---|
| Coating: | AlTiSiN/Others |
| Raw Material: | WF25 |
0.118" 3/32 Inch 3mm Hardened Steel End Mills With Corner Radius Cutter 1/4 Shank
| Product: | HRC65 4 Flute Solid Carbide Corner Radius End Mill |
|---|---|
| Flute Number: | 4 |
| Material: | GU092 GESAC |