All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ end mill bits for cutting aluminum ] match 88 Products.
VIDEO
7mm 5/16" Solid Carbide Square End Mill Set Tool
| Product Name: | Imperial Milling Cutters 5/16" End Mill |
|---|---|
| Diameter: | 5/16" |
| Overall Length: | 2.5" |
VIDEO
2mm 3mm 1/16" CNC End Mill 5/16" Radius Mill Bit HRC60 4 Flute RLD Tools
| Product: | HRC60 Corner Radius End Mill 8R1 |
|---|---|
| Flute Diameter: | 8R1 |
| Flute Length: | 20mm |
VIDEO
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.25 |
| Flute Length: | 5mm |
VIDEO
Carbide 2 Flutes Ball Nose End Mill HRC65 4mm 1/8 Inch For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R2 |
VIDEO
Titanium Carbide Ball Nose End Mill HRC65 10mm Shank Diameter 2 Flutes
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R5 |
VIDEO
Long Carbide Ball Nose End Mill HRC65 12mm 1/2 Inch 2 Flutes For Die Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R6 |
VIDEO
HRC65 2 Flutes Carbide Ball Nose End Mill 10mm Extra Long For Tool Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R5 |
5/16" 2 Flute End Mill 8mm 4 Flute 2 Flute AlTiN Coating
| Product: | HRC50 2 Flute 8mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
6mm 10mm 3/8" Solid Carbide 2 Flute Straight End Mill
| Product: | HRC50 2 Flute 10mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
VIDEO
10mm 3/8" Square Solid Carbide End Mill Cutting Tool Imperial Milling 4 Flutes HRC50
| Product Name: | Imperial Milling Cutters 3/8" End Mill Bits |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |