All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 2 ] match 263 products.
VIDEO
7/16" Imperial Milling Cutters 10mm 11mm Hss End Mill For Square 4 Flutes
| Product Name: | Imperial Milling Cutters 7/16" End Mill |
|---|---|
| Diameter: | 7/16" |
| Overall Length: | 3" |
5/8" Inch Imperial Milling Cutters 14 Mm 15mm Cnc Router End Mill Cuts Square Hole
| Product Name: | Imperial Milling Cutters 5/8" End Mill |
|---|---|
| Diameter: | 5*8" |
| Overall Length: | 4" |
18mm 3/4" Imperial Carbide End Mills 30 Degree 4f Square Nose End Mill HRC55
| Product Name: | Imperial Milling Cutters 3/4" End Mill |
|---|---|
| Diameter: | 3/4" |
| Overall Length: | 4" |
VIDEO
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
| Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
|---|---|
| Diameter: | 1" |
| Overall Length: | 4" |
VIDEO
16mm 5/8 Inch Roughing Imperial Milling Cutters Router Bit
| Product Name: | HRC60 Roughing End Mill For Steel 5/8 Inch |
|---|---|
| Raw Material: | GU25UF Rod |
| Diameter: | 5/8 Inch |
VIDEO
1/8" Aluminum Finishing End Mill 4mm 3 Flute Cutting RLD Tools
| Product Name: | HRC55 4mm High Efficiency Aluminum End Mill |
|---|---|
| Flute Dia: | 4mm |
| Flute Length: | 12mm |
VIDEO
6mm 1/4" 3/8" Milling Aluminum End Mill For 7075 Aluminum 3 Flute DLC Coating
| Product Name: | HRC55 6mm High Efficiency Aluminum End Mill |
|---|---|
| Flute Dia: | 6mm |
| Flute Length: | 18mm |
3Fl Carbide End Mills For Aluminum 8mm End Mill Cutting Angle 40 Degree
| Product Name: | HRC55 8mm High Efficiency Aluminum End Mill |
|---|---|
| Flute Dia: | 8mm |
| Flute Length: | 24mm |
VIDEO
3/8" 5/16" 8mm Solid Carbide Roughing End Mill Coating For Aluminum 3 Flutes HRC50
| Product Name: | HRC50 3 Flute 8mm Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 8mm |
| Flute Length: | 24mm |
13/32" 3/4" 3/8" Carbide Roughing End Mill For 6061 Aluminum 10mm Extra Long
| Product Name: | HRC50 3 Flute 10mm Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 10mm |
| Flute Length: | 30mm |