All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ aluminum cutting end mills ] match 217 Products.
VIDEO
0.787" 20mm Hss Titanium Roughing End Mills Set HRC55 RLD Tools
| Product Name: | HRC55 Roughing End Mill 20mm |
|---|---|
| Coating: | AlTiSiN/Others |
| Raw Material: | WF25 |
VIDEO
10mm 3/8" Imperial Milling Cutter Tool 9mm Ball Nose End Mill Set 2Fl
| Product Name: | HRC50 Imperial Milling Cutters 2F Ballnose End Mill 3/8" |
|---|---|
| Diameter: | 3/8" |
| Flute Length: | 3/4" |
VIDEO
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
VIDEO
Chip Splitter 7 Flutes End Mill AlTiCrN Coating
| Name: | 7 Flutes Chip Splitter End Mills |
|---|---|
| Type: | Custom |
| Coating: | AlTiCrN Coating |
VIDEO
Altin Coating T Slot Custom Tapered End Mills Oem Design
| Name: | T Slot Milling Cutter |
|---|---|
| Type: | Gear Milling Cutter |
| Coating: | AlTiN |
Sus T Slot Custom Profile End Mill Grooving Shank Cutter
| Name: | T Slot Milling Cutter |
|---|---|
| Type: | Gear Milling Cutter |
| Coating: | AlTiN AlTiSiN Or Customized |
Bull Endmill 4 Flutes Solid Carbide Corner Radius End Mills HRC55
| Product: | HRC55 4 Flutes Bull Endmill |
|---|---|
| Radius: | R0.2, R0.5, R1, R2 |
| Material: | WF25 |
VIDEO
4 Flutes Corner Radius Cutter Solid Carbide Corner Rounding End Mill HRC60
| Product: | HRC60 Corner Radius Cutter |
|---|---|
| Number Of Flute: | 4/customized |
| Radius: | R0.2, R0.5, R1, R2 |
VIDEO
1/16" 3/32" 2.5mm Flat Nose End Mill Carbide Cutter HRC50 4 Flutes
| Product: | HRC50 2.5mm Carbide Square End Mill |
|---|---|
| Raw Material: | Carbide |
| Flutes: | 4 |
VIDEO
3/32" 4 Mm 3mm 4 Flute End Mill Bit 1/4" Square End Mill For Cast Iron
| Product: | HRC50 Carbide Square End Mill |
|---|---|
| Raw Material: | Carbide |
| Flutes: | 4 |