All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ aluminum cutting end mills ] match 217 Products.
VIDEO
3/16" 13/32" 5/8" Roughing End Mill For Stainless Steel Fine Pitch HRC60 4 Flutes
| Product Name: | HRC60 Roughing End Mill For Steel 16mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
VIDEO
3/8" 3mm 4mm 1/8" 2 Flute End Mill For Stainless Steel 316
| Product: | HRC60 2 Flute Solid Carbide End Mill 4mm |
|---|---|
| Raw Material: | GU25UF Rod |
| Diameter: | 4 |
VIDEO
7/16" 8mm 10mm 12 Mm 2-Flute Stepped End Mill With Edge Radius
| Product: | HRC60 2 Flute Solid Carbide End Mill 10mm |
|---|---|
| Raw Material: | GU25UF Rod |
| Diameter: | 10 |
VIDEO
1mm 3mm 1/32" 1/16" 3/16" Corner Radius End Mill Bits For CNC Milling Machine HRC60
| Product: | HRC60 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 1R0.2 |
| Flute Length: | 2.5mm |
VIDEO
1mm 4mm 1/2" 1/8 Inch Corner Radius End Mill And Cutter Standard
| Product: | HRC60 Corner Radius End Mill 3R0.5 |
|---|---|
| Flute Diameter: | 3R0.5 |
| Flute Length: | 7.5mm |
VIDEO
10mm 0.393" Metric Full Radius End Mill Bits For Metal Radius Mill Cutter
| Product: | HRC60 Corner Radius End Mill 10R0.5 |
|---|---|
| Flute Diameter: | 10R0.5 |
| Flute Length: | 25mm |
VIDEO
HRC65 High Hardness 1.5mm 2 Flutes 30 Degree End Mill Carbide Ball Nose Endmill
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R0.75 |
| Flute Length: | 3mm |
VIDEO
2 Flutes Ball Nose End Mill 2mm 30 Degree For High Hardness Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.0 |
| Flute Length: | 4mm |
6 Flutes T Slot Custom Ground End Mills Cutter Carbide Alloy Tungsten Steel Slotting Cnc
| Name: | T Slot Carbide End Mill |
|---|---|
| Type: | Slot Milling Cutter |
| Coating: | AlTiN AlTiSiN Or Customized |
VIDEO
12mm Spherical Ball Nose End Mills For Steel Two Flutes 24mm
| Product Name: | HRC50 2 Flutes 12mm Ball Nose End Mill |
|---|---|
| Diameter: | 12R5 |
| Flute Length: | 24mm |