All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ carbide end mills for aluminum ] match 263 products.
3/16" 5mm 2 Flute Hss End Mill 1/4 Inch Flat End Mill Bits 6mm Shank CNC
| Product: | HRC50 2 Flute 5mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |
VIDEO
8mm 4F 9/16" 7/16" 5/16" Ball Nose End Mill Steel Cnc Ball Nose Bit
| Product Name: | HRC50 4 Flutes Ball Nose End Mill 8mm |
|---|---|
| Diameter: | 8mm |
| Flute Length: | 16mm |
1/4" 6mm Ball Nose End Mill Hrc65 For Heated Mold Steel
| Product Name: | HRC65 Ball Nose End Mill 6R3 |
|---|---|
| Diameter: | 6R3 |
| Flute Length: | 12mm |
VIDEO
10mm 3/8" Square Solid Carbide End Mill Cutting Tool Imperial Milling 4 Flutes HRC50
| Product Name: | Imperial Milling Cutters 3/8" End Mill Bits |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |
VIDEO
General Purpose Imperial Milling Cutters 12mm 4F 1/2" 1/4" Square End Mill Bits Set
| Product Name: | Imperial Milling Cutters 1/2" End Mill Cutter |
|---|---|
| Coating: | AlTiN/Customized |
| Material: | YG10X |
VIDEO
Solid Carbide 1/4 Inch End Mill Extra Long AlTiSiN Coating
| Product Name: | Imperial Milling Cutters 1/4" End Mill |
|---|---|
| Diameter: | 1/4" |
| Overall Length: | 2" |
VIDEO
7mm 5/16" Solid Carbide Square End Mill Set Tool
| Product Name: | Imperial Milling Cutters 5/16" End Mill |
|---|---|
| Diameter: | 5/16" |
| Overall Length: | 2.5" |
VIDEO
HRC65 High Hardness 1.5mm 2 Flutes 30 Degree End Mill Carbide Ball Nose Endmill
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R0.75 |
| Flute Length: | 3mm |
VIDEO
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
VIDEO
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.25 |
| Flute Length: | 5mm |