All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ small end mill ] match 65 products.
VIDEO
2mm 5/16" 3/8" 1/8" Extra Long End Mill Cutter Carbide 4Fl 100mm OAL 12mm
| Product: | HRC50 Carbide 4 Flutes 12mm Square End Mill |
|---|---|
| Packaging Details: | One piece end mill in a plastic tube, ten pieces a bundle, then in carton. |
| Delivery Time: | 5-7 work days |
1/4" 1/2" 3/8" Radius Corner Rounding End Mill Cutters HRC50 4Fl Nano Black Coating
| Product: | HRC50 4 Flutes 8R0.5 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 8R0.5 |
| Flute Length: | 20mm |
VIDEO
3/4" 5/8" Metric Corner Rounding End Mill 10mm 1mm HRC55 4 Flutes
| Product: | HRC55 4 Flutes 12R0.5 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 12R0.5 |
| Flute Length: | 30mm |
VIDEO
10 Pcs 11/16" 1/16" 4mm 2mm 4 Flute End Mill Set Bits RLD Tools
| Product: | HRC60 Solid Carbide End Mill2mm |
|---|---|
| Raw Material: | GU25UF From GESAC |
| Flutes: | 4 |
VIDEO
10mm 2 Flute Aluminum End Mill For Router 30 Degree
| Product Name: | HRC50 2 Flute Ball Nose Aluminum End Mill 10R5 |
|---|---|
| Flute Dia: | 10R5 |
| Flute Length: | 30mm |
5/16" 1/2" Solid Carbide Roughing End Mill 1/4 Shank Pitch HRC60
| Product Name: | HRC60 Roughing End Mill For Steel 5/16 Inch |
|---|---|
| Coating: | AlTiN Coating |
| Raw Material: | GU25UF GESAC |
VIDEO
High Hardness Carbide 2 Flutes Ball Nose End Mill 2.5mm 30 Degree For Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.25 |
| Flute Length: | 5mm |
VIDEO
Hard Steel Carbide Ball Nose End Mill 2 Flutes 6mm Shank Diameter
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R3 |
2 Flutes Ball Nose End Mill Hrc65 1/4" 6mm For Heated Die Steel
| Product Name: | HRC65 2 Flutes Ball Nose End Mill |
|---|---|
| Helix Angle: | 30 |
| Coating: | Blue Nano Coating |
Sus T Slot Custom Profile End Mill Grooving Shank Cutter
| Name: | T Slot Milling Cutter |
|---|---|
| Type: | Gear Milling Cutter |
| Coating: | AlTiN AlTiSiN Or Customized |