All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Keywords [ 2 ] match 263 products.
1/8" 1" 1/32" Radius Corner Rounding End Mill Metric 2Fl Concave Radius End Mill 3mm 4mm
| Product Name: | HRC50 2 Flute Solid Carbide Inner Corner Radius End Mill |
|---|---|
| Size: | Can Be Customized |
| Shank Tolerance: | H6 |
VIDEO
Tungsten Solid Carbide Imperial Milling Cutters 4 Flutes Flat Endmills Uncoated
| Type: | Imperial Milling Cutters |
|---|---|
| Size: | Customized |
| Material: | Tungsten Solid Carbide |
1/8" 4mm 4 Flutes Solid Carbide Corner Radius End Mills Radius Bull Nose Endmill HRC50
| Product: | HRC50 4 Flutes Corner Radius End Mill |
|---|---|
| Material: | ZY10EF |
| Coating: | AlTiN |
VIDEO
1mm 1/25" 2mm 1/8" 4 Flute End Mill Aluminum Alloy Steel TiSiN Coating
| Product: | HRC55 4 Flutes 1mm Flat Endmill |
|---|---|
| Flute Diameter: | 1mm |
| Flute Length: | 3mm |
VIDEO
.0625" .015" Tungsten Carbide End Mill 3 Mm 6mm 4Fl For Alloy Steel
| Product Name: | HRC55 4 Flutes 3mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 3mm |
| Flute Length: | 9mm |
VIDEO
9mm 12mm .5" Pitch Imperial Milling Cutters Carbide 1.625" Roughing End Mill Cutter Hss
| Product Name: | HRC60 Roughing End Mill For Steel 1/2 Inch |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF GESAC |
Bull Endmill 4 Flutes Solid Carbide Corner Radius End Mills HRC55
| Product: | HRC55 4 Flutes Bull Endmill |
|---|---|
| Radius: | R0.2, R0.5, R1, R2 |
| Material: | WF25 |
VIDEO
4 Flutes Corner Radius Cutter Solid Carbide Corner Rounding End Mill HRC60
| Product: | HRC60 Corner Radius Cutter |
|---|---|
| Number Of Flute: | 4/customized |
| Radius: | R0.2, R0.5, R1, R2 |
2mm 4mm 6mm 1/8" Corner Radius End Mill Cutter Flute Length 10mm HRC55
| Product: | HRC55 4 Flutes 4R0.5 Corner Radius End Mill |
|---|---|
| Flute Diameter: | 4R0.5 |
| Flute Length: | 10mm |
1/8" 4mm 3 Flute Corner Radius End Mill Bits For Aluminum
| Product Name: | HRC50 3 Flute Corner Radius Aluminum End Mill 2R0.2 |
|---|---|
| Flute Dia: | 2R0.2 |
| Flute Length: | 6mm |