All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
VIDEO
DLC Coating 3 Flutes Aluminium Square End Mill U Groove Shaped
| Product Name: | 3 Flute 10mm Aluminum End Mill U Shape With DLC Coating |
|---|---|
| Flute Diameter: | 10mm |
| Flute Length: | 30mm |
VIDEO
DLC Coating Square Aluminium End Mill U Shaped High Efficiency 3 Flutes 8mm
| Product Name: | 3 Flute 4mm Aluminum End Mill U Shape With DLC Coating |
|---|---|
| Coating: | DLC |
| End Style: | Square |
VIDEO
Solid Micrograin Carbide Aluminium End Mill 3 Flutes U Shaped 4mm 1/8 Inch
| Product Name: | 3 Flute 4mm Aluminum End Mill U Shape With DLC Coating |
|---|---|
| Coating: | DLC |
| End Style: | Square |
VIDEO
6mm 1/4 Inch DLC Coating 3 Flutes High Performance End Mills For Aluminum
| Product Name: | 3 Flute 6mm Aluminum End Mill U Shape With DLC Coating |
|---|---|
| Coating: | DLC Coating |
| End Style: | Square |
VIDEO
20mm 1" Solid Carbide End Mill 25mm Square 4 Flutes
| Product Name: | Imperial Milling Cutters 1 Inch Carbide End Mill |
|---|---|
| Diameter: | 1" |
| Overall Length: | 4" |
VIDEO
HRC65 High Hardness 1mm 2 Flutes Carbide Ball Nose Endmill For Titanium
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R0.5 |
| Flute Length: | 2mm |
VIDEO
HRC65 High Hardness 1.5mm 2 Flutes 30 Degree End Mill Carbide Ball Nose Endmill
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R0.75 |
| Flute Length: | 3mm |
VIDEO
2 Flutes Ball Nose End Mill 2mm 30 Degree For High Hardness Mold Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.0 |
| Flute Length: | 4mm |
VIDEO
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
5/16" 2 Flute End Mill 8mm 4 Flute 2 Flute AlTiN Coating
| Product: | HRC50 2 Flute 8mm Carbide Flat Endmill |
|---|---|
| Raw Material: | ZY10EF |
| Flute Number: | 2 |